Mocom millennium B - ALARM LIST - “A” CODES

Rev. 1
Page 3-
9
CODE ALARM DESCRIPTION LCD INDICATION RESET MODE
A 250
1st vacuum pulse not reached within
timeout
PV1 TIMEOUT
A 251
1st rise to ambient pressure not reached
within timeout
ATM1 TIMEOUT
A 252
1st pressure pulse not reached within
timeout
PP1 TIMEOUT
A 253
2nd vacuum pulse not reached within
timeout
PV2 TIMEOUT
A 254
2nd rise to ambient pressure not reached
within timeout
ATM2 TIMEOUT
A 255
2nd pressure pulse not reached within
timeout
PP2 TIMEOUT
A 256
3rd vacuum pulse not reached within
timeout
PV3 TIMEOUT
A 257
3rd rise to ambient pressure not reached
within timeout
ATM3 TIMEOUT
A 258
3rd pressure pulse not reached within
timeout
PPP TIMEOUT
A 259
Phase of PROCESS not started within
timeout
PROCESS TIMEOUT
A 260
Chamber depressurization not completed
within timeout
TIMEOUT PPD
Press key
(> 3 seconds)