Restricting Machine Functions According to User
99
2
F Click [User Function List].
A list of currently registered user entries appears.
G Select a user entry, and then click [Edit].
H Type a unique user Name in [User] using up to 16 alphanumeric characters.
I Type a unique user ID in [ID] using up to 8 digits.
The user ID will be used to authenticate users at the control panel, when they
try to use a restricted function.
J Select the functions you want to make available for the user upon authen-
tication.
Unselected functions will be unavailable to users authenticated under this
user ID.
K Enter the administrator password if required.
L Click [Submit].
M Close the Web browser.
Note
❒ You must enter both a user name and user ID to register a user entry.
❒ No two user entries can have the same user name or user ID.
Reference
For details about using a Web Image Monitor, see p.241 “Using Web Image
Monitor”.
To Next Page
Loading...
