Ricoh Aficio SP C232SF - Fax System Settings; Changing Fax System Settings; Fax System Setting Parameters

Configuring the Machine Using the Control Panel
212
7
Fax System Settings
This section describes how to configure the fax system settings.
Changing Fax System Settings
The procedure for setting the tray for printing faxes is provided as an example.
A Press the {User Tools} key.
B Press the {U}{T} keys to select [Fax Settings], and then press the {OK} key.
C Press the {U}{T} keys to select [Tray Settings], and then press the {OK} key.
D Press the {U}{T} keys to select [Tray Use: Fax], and then press the {OK} key.
E Press the {U}{T} keys to select the desired tray, and then press the {OK}
key.
The new setting is displayed with an “p” symbol, indicating that the setting
has been changed.
F Confirm the setting, and then press the {} key.
G Press the {Clear/Stop} key to return to the initial screen.
Note
❒ You can press the {} key to exit to the previous level of the menu tree.
Fax System Setting Parameters
This section describes fax system setting parameters.
❖ RX Settings (Reception Settings)
Specifies the settings for receiving a fax.
• RX Mode
Specifies the reception mode.
Default: [Fax Only]
BPC028S