If the Machine is Not Going to Be Used for a Long Time
325
10
Using the Machine Again After It Has Been Inactive for a Long Period
Use the following procedure to start using the machine again after it has been
inactive for a long period.
Important
❒ To avoid damage to the fusing unit's knobs, be sure to turn both knobs back
to their original positions, as shown in the following procedure.
A Plug in the power cable.
B Pull Front Cover Open Lever, and then open the front cover with both
hands carefully.
C Lower the blue fusing unit lever.
BPC045S
BPC047S
To Next Page
Loading...
