Configuring the Machine Using Web Image Monitor
262
8
❖ System
Configuring the SMTP Settings
Click the [SMTP] tab on the network settings page to configure the SMTP set-
tings.
❖ SMTP Settings
Item Description
System Location Enter the location of the machine. The location
entered here is displayed on the main page.
Can contain up to 64 characters.
System Contact Enter the contact information of the machine.
The contact information entered here is dis-
played on the main page. Can contain up to 64
characters.
Item Description
Primary SMTP/POP3 Server Enter the IP address or host name of the
SMTP/POP3 server. Can contain up to 32
characters.
Port Number Enter the port number for SMTP (1 to 65535).
Authentication Method Select an authentication method from the fol-
lowing:
[Anonymous]: The user name and password are
not necessary.
[SMTP Authentication]: The machine supports
NTLM and LOGIN authentication.
[POP before SMTP]: The POP3 server is used for
authentication. The same server as the SMTP
server is used as the POP3 server.
User Name Enter the user name for logging in to the SMTP
server. Can contain up to 32 characters.
Password Enter the password for logging in to the SMTP
server. Can contain up to 32 characters.
To Next Page
Loading...
Need help?
General
