Ricoh Aficio SP C232SF - Specifying the Destination Using the Broadcast Function

Using the Fax Function
174
6
B Enter the first letters of the desired Speed Dial entry's name using the num-
ber keys.
Each time you enter a character, the display changes to show matching
names.
C Confirm that the desired entry is shown on the display, and then press the
{OK} key.
Note
❒ When searching through the Address Book, only the Speed Dial entries
will be found, not the Quick Dial entries.
❒ You can check the registered names and fax numbers by printing a report.
Reference
For details about entering characters, see p.95 “Entering Characters”.
For details about registering the Speed Dial entries, see p.160 “Registering
Fax Destinations”.
For details about printing the Speed Dial list, see p.226 “Reports Print”.
Specifying the destination using the broadcast function
You can send a fax to multiple destinations simultaneously. You can broadcast
faxes to a maximum of 100 destinations.
Faxes are sent to destinations in the order they were specified.
A Specify the destination using Quick Dial, Speed Dial, or the number keys.
BPC066S