Ricoh Aficio SP C232SF - Configuring the SNMP Settings

Configuring the Network Settings
261
8
Configuring the SNMP Settings
Click the [SNMP] tab on the network settings page to configure the SNMP set-
tings.
❖ SNMP Setting
❖ Trap
❖ Community
Item Description
SNMP Select whether to enable the machine to use
SNMP services.
Item Description
Target Trap Select whether to enable the machine to send
traps to the management host (NMS).
SNMP Management Host 1 Enter the IP address or host name of a manage-
ment host. Can contain up to 32 characters.
SNMP Management Host 2 Enter the IP address or host name of a manage-
ment host. Can contain up to 32 characters.
Item Description
Get Community Enter the community name to use for authen-
tication of Get requests. Can contain up to 32
characters.
Trap Community Enter the community name to use for authen-
tication of Trap requests. Can contain up to 32
characters.