137
5. Using the Scanner Function
This chapter describes the scanner functions.
There are two scanning methods: scanning using the control panel and scanning
from the computer (TWAIN scanning).
The Screen in Scanner Mode
This section provides information about the screen in scanner mode.
By default, the display shows the copier screen when the machine is turned on.
If the copier or fax screen is shown on the display, press the {Scanner} key on the
control panel to switch to the scanner screen.
❖ Screen in standby mode
Note
❒ Scanner mode cannot be specified as the start-up mode.
BPC019S
Ready
Press Address
To Next Page
Loading...
Need help?
General
