Using the Fax Function
172
6
Specifying the destination using the One Touch buttons
This section describes how to select a destination registered as a Quick Dial entry
using One Touch buttons.
A Press the One Touch button to which the desired Quick Dial entry is regis-
tered.
Press the {Shift} key if you want to use Quick Dial entries Nos. 11 to 20 before
pressing a One Touch button.
Note
❒ You can check the registered names and fax numbers by printing a report.
Reference
For details about registering the Quick Dial entries, see p.160 “Registering
Fax Destinations”.
For details about printing the Quick Dial list, see p.226 “Reports Print”.
Specifying the destination using Speed Dial
This section describes how to select a destination registered as a Speed Dial en-
try.
There are two ways to select a destination:
• Entering a Speed Dial number
• Searching by Speed Dial name
BPC027S
To Next Page
Loading...
Need help?
General
