Getting Started
100
2
Modifying user entries
This section describes how to modify user entries.
A Start the Web browser, and access the machine by entering its IP address.
B Click [Restrict User Function].
C Click [User Function List].
A list of currently registered user entries appears.
D Select the entry to modify, and then click [Edit].
E Modify settings as necessary.
F Enter the administrator password if required.
G Click [Submit].
H Close the Web browser.
Reference
For details about using a Web Image Monitor, see p.241 “Using Web Image
Monitor”.
Deleting user entries
This section describes how to delete user entries.
A Start the Web browser, and access the machine by entering its IP address.
B Click [Restrict User Function].
C Click [User Function List].
A list of currently registered user entries appears.
D Select the entry to delete, and then click [Delete].
E
Confirm that the entry you have selected is the entry that you want to delete.
F Enter the administrator password if required.
G Click [Submit].
H Close the Web browser.
Reference
For details about using a Web Image Monitor, see p.241 “Using Web Image
Monitor”.
To Next Page
Loading...
