Guide to the Machine
12
1
Important
❒ This function is only available when the original is set in the ADF, not when
it is set on the exposure glass.
You can either set this machine to always make photocopies in 2-in-1 or 4-in-1
mode, or use this function only when necessary.
❖ Preparation for copying multiple images
To always make photocopies in 2-in-1 or 4-in-1 mode:
A Configure the machine's default [Reduce/Enlarge] setting.
For details, see p.200 “Copy Settings”.
To use this function for the current job only:
A Configure the setting using the {Reduce/Enlarge} key before starting the
current job.
For details, see p.125 “Copying Two or Four Pages onto One Sheet”.
Copying both sides of an ID card onto one side of paper
You can copy the front and back sides of an ID card, or other small document,
onto one side of a sheet of paper.
Important
❒ This function is only available when the original is set on the exposure glass,
not when it is set in the ADF.
You can either set this machine to always make photocopies in ID card copy
mode, or use this function only when necessary.
BAA085S
BPC006S
To Next Page
Loading...
Need help?
General
