Ricoh Aficio SP C232SF - If the Machine Is Not Going to be Used for a Long Time; Preparing the Machine for a Long Period of Inactivity

If the Machine is Not Going to Be Used for a Long Time
323
10
If the Machine is Not Going to Be Used for
a Long Time
If the machine is going to be inactive for a long time, follow the procedure shown
here.
R
WARNING:
R
CAUTION:
Preparing the Machine for a Long Period of Inactivity
Use this procedure to prepare the machine for a long period of inactivity with its
power switch turned off.
Note that not using the following procedure could result in unusual noises when
use of this machine is resumed.
Important
❒ Do not switch off the machine during printing.
A Turn off the power switch.
B Pull out the plug from the socket.
C Pull Front Cover Open Lever, and then open the front cover with both
hands carefully.
• Plug and unplug the power cable with dry hands, or an electric shock
could occur.
• The inside of this machine becomes very hot. Do not touch parts labelled
“v” (indicating a hot surface).
• Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will
not be damaged under the machine.
BPC045S