Maintenance
316
10
Cleaning the Registration Roller
The registration roller can become dirty with paper dust if you print to non-stan-
dard paper.
Clean the registration roller if white dots appear on prints.
CAUTION:
Important
❒ Do not use chemical cleaning fluids or organic solvents such as thinner or
benzine.
❒ Do not touch the transcription roller (the white area in the illustration below).
A Turn off the power.
B Unplug the power cord from the wall outlet. Remove all the cables from the
machine.
C Pull the opening lever on the front cover, and then carefully lower the front
cover.
• Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will
not be damaged under the machine.
• The inside of this machine becomes very hot. Do not touch parts labelled
“v” (indicating a hot surface).
BPC072S
BPC045S
To Next Page
Loading...
