Configuring the Administrator Settings
267
8
Note
❒ If the setting are not restored successfully, an error message appears. Try
again to restore the file completely.
Configuring the Date and Time Settings
Click the [Date/Time Setup] tab on the administrator settings page to configure the
date and time settings.
❖ Date Setting
❖ Time Setting
Item Description
Year Enter the current year (2000 to 2099).
Month Enter the current month (1 to 12).
Day Enter the current day (1 to 31).
Date Format Select the date format from Mm/Dd/Yyyy,
Dd/Mm Yyyy, or Yyyy Mm/Dd.
Item Description
Time Format Select 24-hour format or 12-hour format.
Time (am/pm) Select AM or PM if 12-hour time format is se-
lected.
Hour (0-23) Enter the current hour if 24-hour time format
is selected (0-23).
Hour (1-12) Enter the current hour if 12-hour time format
is selected (1-12).
Minute (0-59) Enter the current minute (0-59).
To Next Page
Loading...
Need help?
General
