Configuring the Machine Using Web Image Monitor
264
8
Configuring the Administrator Settings
Click [Admin Settings] to display the page for configuring the administrator set-
tings.
This page contains six tabs: [Password], [Default Settings], [Backup Settings], [Re-
store Settings], [Date/Time Setup], and [Power Saver].
Configuring the Password
Click the [Password] tab on the administrator settings page to configure the pass-
word.
❖ Administrator Password
Restoring the Default Settings
Click the [Default Settings] tab on the administrator settings page to restore the
machine's default settings.
Item Description
New Password Enter the new administrator password. Can
contain up to 16 characters.
Confirm New Password Enter the same password again, to confirm.
To Next Page
Loading...
Need help?
General
