Sending a Fax
175
6
B Press the {OK} key.
Repeat these steps to add further destinations.
Note
❒ While specifying multiple destinations, you can press the {Clear/Stop} key
to clear all destinations.
❒ If you specify multiple destinations in Immediate Transmission mode, the
mode switches to Memory Transmission mode temporarily.
❒ While broadcasting, pressing the {Clear/Stop} key cancels the fax to the cur-
rent destination only.
Specifying the destination using the redial function
You can specify the last used destination as the destination for the current job.
This function saves time when you are sending to the same destination repeat-
edly, as you do not have to enter the destination each time.
A Press the {Pause/Redial} key.
BPC026S
BPC015S
To Next Page
Loading...
