Using Manuals
7
1
Opening Manuals
This section describes how to open the manuals. There are three ways to view
the manuals.
Opening from the desktop icon
Follow the procedure below to open the manuals from the desktop icon.
A Double-click the manual icon on your desktop.
The manual opens.
Opening from the [Start] menu
Follow the procedure below to open the manual from the [Start] menu.
A On the [Start] menu, point to [All Programs], point to [Product Name], and then
click [Manual Name].
The manual opens.
Note
❒ The menu options may appear differently, depending on the options cho-
sen during installation.
Opening from the CD-ROM
Follow the procedure below to open the manual from the CD-ROM.
A Insert the “Manuals” CD-ROM into the CD-ROM drive.
If you are using a computer running a Macintosh operating system, open
“Manuals.htm” from the CD-ROM root directory.
B Select a language for the interface and a product, and then click [OK].
C Click [Read manuals], and then select the manual you want to read.
The manual opens.
Note
❒ If you are using a computer running a Windows operating system, the CD-
ROM opens automatically. However, AutoRun may not work under cer-
tain operating system settings. If this is the case, launch “setup.exe” from
the CD-ROM root directory.
To Next Page
Loading...
Need help?
General
