Troubleshooting
304
9
Replacing the Waste Toner Bottle
WARNING:
CAUTION:
❖ Messages on the screen
• Replace the waste toner bottle when the following message appears on the
screen:
“
Life End Waste Toner Bottle”
• Prepare a waste toner bottle when the following message appears on the
screen:
“
Near End Waste Toner Bottle”
Important
❒ Waste toner bottles cannot be reused.
❒ For easy replacement, we recommend you purchase and store extra waste
toner bottles.
❒ When removing the waste toner bottle, make sure not to tilt it.
❒ Make sure the transfer unit is installed. If the transfer unit is not installed, in-
stall it before turning on the power.
❒ Comply with the waste toner bottle Recycling Program, whereby used waste
toner bottles are collected for recycling.
❒ Before removing the waste toner bottle from the machine, spread paper or
similar material around the area to keep toner from dirtying your workspace.
• Do not incinerate spilled toner or used toner. Toner dust might ignite
when exposed to an open flame.
• Wait at least 30 minutes after disconnecting the power plug before re-
moving the transfer unit.
• Do not incinerate used toner or toner containers. Toner dust might ig-
nite when exposed to an open flame. Dispose used toner containers in
accordance with local regulations.
• The inside of this machine becomes very hot. Do not touch parts labelled
“v” (indicating a hot surface).
• Keep toner (used or unused) and toner containers out of reach of children.
To Next Page
Loading...
