19191919
Using the Fax Function
❖ Adjusting Image Density
You can adjust the image density for the current job.
1. Press the [Density] key.
2. Press the [Density] or [ ][ ] keys to select the desired density level, and then press
the [OK] key.
❖ Specifying Resolution
You can specify the scan resolution for the current job.
1. Press the [Image Quality] key.
2. Press the [Image Quality] or [ ][ ] keys to select the desired resolution setting, and
then press the [OK] key.
• For more details about the fax function, see "Using the Fax Function", User Guide.
• If you would like to change the default settings of the machine, see "Configuring the Machine
Using the Control Panel", User Guide.
Normal Dark Light
Fine PhotoStandard
for originals with
small print
for originals with
images
for originals with
normal-sized characters
Advanced Scan Settings
To Next Page
Loading...
