Guide to Components
23
1
Interior
1. Print Cartridges
Load from the machine rear, in the order
of cyan (C), magenta (M), yellow (Y), and
black (K). Messages appear on the screen
when print cartridges need to be re-
placed, or new ones need to be prepared.
2. Waste Toner Bottle
Collects excess toner during printing.
Messages appear on the screen when the
waste toner bottle needs to be replaced,
or a new one needs to be prepared.
3. Transfer Unit
Remove this unit when replacing the
waste toner bottle.
Reference
For details about the messages that appear on the screen when consumables
need to be replaced, see p.291 “Error and Status Messages on the Screen”.
Control Panel
This section describes the names and usage of the parts of the control panel.
Important
❒ The actual control panel may look different from the illustration below, de-
pending on the country of use.
BPC037S
To Next Page
Loading...
Need help?
General
