Configuring the Machine Using Web Image Monitor
244
8
Checking the System Information
Click [Home] to display the main page of Web Image Monitor. You can check the
current system information on this page.
This page contains three tabs: [Status], [Counter], and [Machine Information].
Checking the Status Information
Click the [Status] tab on the main page to display system information, paper tray
status and toner levels.
❖ Toner
Item Description
Name Shows the name of the machine.
Location Shows the location of the machine as registered on the
[
SNMP
]
page.
Contact Shows the contact information of the machine as registered on
the
[
SNMP
]
page.
Host Name Shows the host name used with the current network protocol.
Device Status Shows the current messages on the machine's display.
Item Description
Black Toner Shows the amount of black toner remaining.
Magenta Toner Shows the amount of magenta toner remaining.
Yellow Toner Shows the amount of yellow toner remaining.
Cyan Toner Shows the amount of cyan toner remaining.
Waste Toner Bottle Shows the amount of waste toner in the waste toner bottle, as
“
Status OK”, “Near Full” or “Full”.
To Next Page
Loading...
Need help?
General
