Basic Operation in Copier Mode
121
4
❒ If a paper jam occurs, printing stops after the current page has been printed
out. After the jammed paper is removed, printing restarts from the
jammed page automatically.
❒ If a scanning jam occurs in the ADF, copying is canceled immediately. In
this case, copy the originals again starting from the jammed page.
Reference
To place the original, see p.91 “Placing Originals”.
To make advanced photocopy settings, see p.123 “Making Enlarged or Re-
duced Copies”, p.125 “Combining Multiple Pages”, p.131 “Making 2-sided
Copies”, and p.134 “Specifying Scan Settings”.
For details about [Paper Select] or [Sort], see p.200 “Copy Settings”.
For details about how to remove the jammed paper, see p.272 “Removing
Printing Jams” or p.278 “Removing Scanning Jams”.
Canceling a Copy
Follow the procedure below to cancel copying.
❖ While scanning the original
If copying is canceled while the machine is scanning the original, copying is
cancelled immediately and there is no printout.
When the original is set in the ADF, scanning stops after the current page has
been fed.
❖ While printing
If copying is canceled during printing, the photocopy process is canceled after
the current page has been printed out.
A Press the {Copy} key.
BPC018S
To Next Page
Loading...
Need help?
General
