Using the Fax Function
168
6
B Press any menu key.
C Press the {U}{T} keys to select [Immediate TX], and then press the {OK} key.
D Press the {U}{T} keys to select [Off], [On], or [Next Fax Only], and then press
the {OK} key.
For Memory Transmission, select [Off].
For Immediate Transmission, select [On] or [Next Fax Only].
The new setting is displayed with an "p" symbol, indicating that the setting
has been changed.
E Confirm the setting, and then press the {} key.
F Press the {Clear/Stop} key to return to the initial screen.
Note
❒ You can press the {} key to exit to the previous level of the menu tree.
Basic Operation for Sending a Fax
This section describes the basic operation for sending a fax.
Important
❒ The original in the ADF takes precedence over the original on the exposure
glass if you place originals both in the ADF and on the exposure glass.
A Press the {Facsimile} key.
BPC012S
BPC020S
To Next Page
Loading...
Need help?
General
