Configuring the Machine
51
2
Configuring the Machine
This section describes configuring the settings required to use the machine on a
network and as a fax machine.
Configuring the IP Address Settings
The procedure for configuring network settings differs depending on whether
IP address information is assigned automatically by the network (DHCP), or
manually.
Setting the machine to receive an IP address automatically
Important
❒ A DHCP server is required on the network for the machine to receive an IP
address automatically.
A Press the {User Tools} key.
B Press the {U}{T} keys to select [Network Settings], and then press the {OK}
key.
C If you are requested to enter a password, enter the password using the num-
ber keys, and then press the {OK} key.
D Press the {U}{T} keys to select [IP Configuration], and then press the {OK}
key.
E Press the {U}{T} keys to select [DHCP Activated], and then press the {OK}
key.
F Press the {U}{T} keys to select [On], and then press the {OK} key.
The new setting is displayed with an “p” symbol, indicating that the setting
has been changed.
G Confirm the setting, and then press the {} key.
BPC028S
To Next Page
Loading...
Need help?
General
