Using the Fax Function from a Computer (LAN-Fax)
181
6
Note
❒ The procedure for opening the driver's properties may vary depending on
the operating system.
❒ From the [View] list, you can select the type of destinations to display.
• [All]: Displays all destinations.
• [Group]: Displays groups only.
• [User]: Displays individual destinations only.
Registering destinations
This section describes how to register destinations in the LAN-Fax Address
Book.
A Open the LAN-Fax Address Book, and then click [Add User].
B Register the required information and click [OK].
For details, see the table below.
Setting LAN-Fax destinations
Item Setting Description
Name Required Name of the destination. Can
contain up to 32 characters.
Company Optional Company name of the desti-
nation. Can contain up to 64
characters. You can select
from registered data.
Department Optional Department name of the des-
tination. Can contain up to 64
characters. You can select
from registered data.
Telephone Optional Telephone number of the
destination. Can contain up
to 40 characters.
Fax Required Fax number of the destina-
tion. Can contain up to 40
characters.
To Next Page
Loading...
Need help?
General
