Configuring the Network Settings
257
8
Configuring the Network Settings
Click [Network Settings] to display the page for configuring the network settings.
This page contains six tabs: [Network Status], [Network Application], [DNS], [Alert Mes-
sages], [SNMP], and [SMTP].
Checking the Network Status
Click the [Network Status] tab on the network settings page to display network in-
formation.
❖ General Status
❖ TCP/IP Status
Item Description
Link Status Shows the type and speed of the network con-
nection.
IPP Printer Name Shows the name used to identify the machine
on the network.
Network Version Shows the version of the machine's network
module (a part of the machine firmware).
MAC Address Shows the MAC address of the machine.
Item Description
DHCP Select whether the machine should receive a
dynamic IP address automatically using DH-
CP. To use DHCP, select [Enable]. When en-
abled, the items below cannot be configured.
IP Address Enter the IP address for the machine.
Subnet Mask Enter the subnet mask of the network.
Gateway Enter the IP address of the network gateway.
To Next Page
Loading...
Need help?
General
