Making 2-sided Copies
131
4
Making 2-sided Copies
This section describes how to set the machine to make 2-sided copies by copying
single-sided documents onto the front and back sides of the paper.
Important
❒ This function is only available when the original is set in the ADF, not when
it is set on the exposure glass.
❒ Paper must be fed from tray 1 or tray 2, not from the bypass tray.
❒ The paper size must be A4, B5, Letter, Legal, or Executive.
❒ The paper type must be thin, plain, recycled, color, preprinted or
prepunched.
There are two copy orientation options:
❖ Top to Top
•Portrait
•Landscape
BPC002S
BPC003S
To Next Page
Loading...
