Getting Started
86
2
Loading Paper in the Bypass Tray
Important
❒ Set the size of the loaded paper using the control panel or the printer driver.
Make sure the settings do not conflict. Otherwise, the paper may jam or the
print quality may be affected.
❒ Load paper with the print side down and in the short-edge feed direction.
❒ Duplex printing is not possible.
❒ You cannot use the bypass tray to feed in paper that requires a specified print-
ing position (such as preprinted paper). Use tray 1 for such paper.
❒ If paper is curled, straighten it before loading, by bending it the paper in the
opposite direction to the curl, for example.
❒ Do not load paper while the machine is printing.
❒ Tray 1 and 2 are unavailable while paper is being loaded in the bypass tray.
❒ You cannot load paper into the bypass tray while the machine is in Energy
Saver mode. If the machine is in Energy Saver mode, press the {Copy} key to
recover from Energy Saver mode.
A Insert the top edge of the paper into the machine.
B Adjust the paper guides to the paper size.
BPC038S
BPC039S
To Next Page
Loading...
Need help?
General
