Installing Options
61
2
❒ If the optional paper feed unit is not installed properly, reinstall it follow-
ing this procedure. If you cannot install it properly even after attempting
reinstallation, contact your sales or service representative.
Reference
For details about printing configuration page, see p.226 “Printing the Con-
figuration Page”.
For details about loading paper in tray 2, see p.84 “Loading Paper in the
Optional Paper Feed Unit”.
Installing the Memory Unit Type F 256MB (DDR-SDRAM Module)
CAUTION:
Important
❒ The optional memory unit can be installed in the Type 2 model only.
❒ Before touching the memory unit, ground yourself by touching something
metal to discharge any static electricity. Static electricity can damage the
memory unit.
❒ Do not subject the memory unit to physical shocks.
A Turn off the power, and then unplug the power cord.
B Remove the memory cover.
• Before installing the memory unit to the machine, turn off the power and un-
plug the power cable. When turning on the machine after the installation, be
sure to close the memory cover in advance.
BAA024S
To Next Page
Loading...
Need help?
General
