Getting Started
60
2
C Remove the adhesive tape from the optional paper feed unit.
D Lift using the inset grips on both sides of the machine.
E There are three upright pins on the optional paper feed unit. Align them
with the holes on the underside of the machine, and then carefully lower
the machine onto them.
F After installing the option, print the configuration page to confirm the in-
stallation.
If it is installed properly, “Tray 2” will appear under “Tray Info” on the con-
figuration page.
Note
❒ After installing the optional paper feed unit, select tray 2 in the printer
driver. For details, see the printer driver Help.
ASH025S
BAA023S
ASH003S
To Next Page
Loading...
