Paper and Other Media
69
2
❖ Envelope
Unsupported Types of Paper
Avoid using the following paper as they are not supported by this machine.
• Paper meant for an ink-jet printer
• Bent, folded, or creased paper
• Curled or twisted paper
• Torn paper
• Wrinkled paper
• Damp paper
• Paper that is dry enough to emit static electricity
• Paper that has already been printed onto, except a preprinted letterhead.
Malfunctions are especially likely when using paper printed on by other than
a laser printer (e.g. monochrome and color copiers, ink-jet printers, etc.)
• Special paper, such as thermal paper, aluminum foil, carbon paper and con-
ductive paper
• Paper that is heavier or lighter than the specified limitations
• Paper with windows, holes, perforations, cutouts, or embossing
• Adhesive label paper on which the adhesive underlayer or base paper is ex-
posed
• Paper with clips or staples
• Do not use ink-jet printer paper because it may stick to the fusing unit and
cause a paper jam.
• Do not load OHP transparencies. Load translucent media only.
• Do not use paper that has already been printed onto by other printers.
Note
❒ Even supported types of paper may cause paper jams or malfunctions if the
paper is not in good condition.
Item Description
Supported paper tray Tray 1 and bypass tray
Duplex supported size None
Notes • The number of envelopes that can be printed in one
minute is approximately half that of plain paper weigh-
ing 75 to 90 g/m
2
(19 to 24 lb.).
• If printed envelopes come out badly creased, load the en-
velopes in the opposite direction. Also, configure the
printer driver to rotate the print object 180 degrees.
For details about changing the loading orientation, see
the printer driver Help.
To Next Page
Loading...
Need help?
General
