Configuring the Network Settings
259
8
❖ mDNS Setting
Configuring the DNS Settings
Click the [DNS] tab on the network settings page to configure the DNS settings.
❖ DNS Settings
Port # Enter the TCP port number to use for raw
printing. The valid range is 1024 to 65535, ex-
cept 53550 (default is 9100).
LPR Select to enable network printing using
LPR/LPD (via TCP port 515).
Item Description
mDNS Select to enable Multicast DNS (via UDP port
5353). If disabled, the item below cannot be
configured.
Printer Name Enter the name of the machine. Can contain up
to 32 characters.
Item Description
DNS Method Select whether to specify domain name serv-
ers manually or receive DNS information from
the network automatically. When set to [Auto],
the items below become unavailable.
Primary DNS Server Enter the IP address of the primary DNS.
Secondary DNS Server Enter the IP address of the secondary DNS.
Domain Name Enter the domain name for the machine. Can
contain up to 32 characters.
DNS Timeout Enter the number of seconds the machine
waits before considering a DNS request to
have timed out (5 to 100).
Item Description
To Next Page
Loading...
