Using the Scanner Function
154
5
Scanning from a computer (Mac OS X)
The following procedure uses Mac OS X and PageManager as an example.
The procedure may vary depending on PageManager's version. For details, see
the manual for PageManager.
A Place the original on the exposure glass or in the ADF.
B On the [Go] menu, click [Applications].
C Point to [Presto! PageManager X.XX], and then double-click [Presto! PageMan-
ager X].
"X" indicates the version of PageManager.
D On the [File] menu, point to [Select Source…], and then click [TWAIN…].
E In the [Select Source] dialog box, select the scanner, and then click [OK].
F On the [Tools] menu, select [Scan Setting...].
For details, see the TWAIN driver Help or the manual for PageManager.
G Configure the scan settings as required, and then click [OK].
For details, see the TWAIN driver Help or the manual for PageManager.
H On the [File] menu, click [Acquire Image Data...].
I Configure the scan settings as required, and then click [Scan].
J On the [Presto! PageManager X] menu, click [Quit Presto! PageManager X].
Note
❒ If there are two or more scanners on the network, make sure you have se-
lected the correct scanner. If you have not, click [Select Source...] on the [File]
menu, and select the scanner again.
❒ You can use the launcher installed with PageManager to perform the fol-
lowing scan operations easily. For more details, see the manual for Page-
Manager.
• Scanning originals into another application.
• Passing the scanned files to an OCR application.
• Passing the scanned files to an email application to send as attachments.
• Saving the scanned files in a preset folder.
To Next Page
Loading...
