Configuring the Machine Using the Control Panel
210
7
E Confirm the setting, and then press the {} key.
F Press the {Clear/Stop} key to return to the initial screen.
Note
❒ You can press the {} key to exit to the previous level of the menu tree.
Fax Transmission Setting Parameters
This section describes fax transmission setting parameters.
❖ Immediate TX
Sets the machine to send a fax immediately when the original is scanned.
Default: [Off]
•Off
Select this when using Memory Transmission.
•On
Select this when using Immediate Transmission.
•Next Fax Only
Select this when using Immediate Transmission for the next transmission
only.
❖ Resolution
Specifies the resolution to use for scanning originals.
Default: [Standard]
•Standard
Select this when the original is a printed or typewritten document with
normal-sized characters.
•Fine
Select this when the original is a document with small print.
•Photo
Select this when the original contains images such as photographs or shad-
ed drawings.
❖ Density
Specifies the image density to use for scanning originals.
Default: [Normal]
•Light
•Normal
•Dark
❖ Pause Key Time
Specifies the length of pause time when a pause is inserted between the digits
of a fax number.
Default: 3 seconds
• 1 to 15 seconds, in 1 second increments
To Next Page
Loading...
