Cleaning
315
10
F Push the metal plate down until it clicks into place to lock it.
G Reload the removed paper into the tray, and then push the tray carefully
into the machine until it clicks into place.
H Insert the plug of the power cord into the wall socket securely. Connect all
the interface cables that were removed.
I Turn on the power.
Note
❒ If jams or multi-sheet feeds occur after cleaning the friction pad, contact
your sales or service representative.
❒ If the optional tray 2 is installed, clean its friction pad and paper feed roller
in the same way as you did for tray 1.
BAA031S
BAA097S
To Next Page
Loading...
