Using the Copier Function
136
4
❒ Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [Auto Clear]
while the initial screen is displayed.
•When the {Clear/Stop} key is pressed while the initial screen is dis-
played.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
Reference
For details about [Quality], see p.200 “Copy Settings”.
For details about [Auto Clear], see p.231 “Administrator Settings”.
To Next Page
Loading...
Need help?
General
