Combining Multiple Pages
129
4
C Place the original front side down and top to the machine rear on the expo-
sure glass.
Place the original in the center of the A5/Half Letter scan area.
D Press the {B&W Start} key or {Color Start} key.
A message prompting you to place the original back side down on the expo-
sure glass appears on the display.
E Within 30 seconds, place the original back side down and top to the ma-
chine rear on the exposure glass, and then press the {B&W Start} key or {Col-
or Start} key again.
Use the same mode (color or black-and-white) for both sides.
Note
❒ Use the following keys to cancel settings:
• {}: Cancels the changes made to settings and returns the display to
the previous screen.
• {Clear/Stop}: Cancels the changes made to settings and returns the dis-
play to the initial screen.
❒ If you do not copy the back side within 30 seconds after copying the front
side, the job will be canceled.
❒ Regardless of the machine's reduction or enlargement ratio setting, an ID
card copy will always be made at 100%.
❒ You can change the machine's default [Reduce/Enlarge] setting to always
make photocopies in ID card copy mode.
❒ Setting this function for the current job temporarily disables the [Duplex
Copy] setting automatically. However, after the temporary job setting is
cleared, the duplex copy function becomes will be enabled again automat-
ically.
BPC007S
To Next Page
Loading...
Need help?
General
