Using the Scanner Function
156
5
• When using the ADF:
[ADF-Faster]
Select this to scan originals with many
graphics, originals with both text and
graphics, line art, or color photo-
graphs in fast scan mode.
[ADF-Better]
Select this to scan originals with many
graphics, originals with both text and
graphics, line art, or color photo-
graphs in high-resolution scan mode.
[ADF-gray]
Select this to scan originals with many
graphics, originals with both text and
graphics, line art, or color photo-
graphs as grayscale images.
[Custom...]
Select this to configure your own scan
settings. You can save or delete your
custom scan settings by clicking [Save
As] or [Delete], respectively.
4. Mode:
Select from color, grayscale, or black-
and-white.
5. Resolution:
Select a resolution from the list. If you se-
lect [User defined], enter a resolution value
directly in the edit box. Note that increas-
ing the resolution also increases the file
size and scanning time.
Selectable resolutions vary depending on
where the original is set.
• When using the exposure glass:
75, 100, 150, 200, 300, 400, 500, 600,
1200, 2400, 4800, 9600, 19200 dpi, User
defined
• When using the ADF:
75, 100, 150, 200, 300, 400, 500, 600 dpi,
User defined
6. Size:
Select the scanning size. If you select [Us-
er defined], enter the scanning size directly
in the edit box. Also, you can change the
scanning size with your mouse in the
preview area. You can select the unit of
measure from [cm], [inches], or [pixels].
7. Scan task:
Displays a maximum of 10 previously
used scan areas. To remove a scan task,
select the number of the task, and then
click [Remove]. When scanning from the
exposure glass, you can select [Auto Crop]
to let the scanner automatically detect the
size of your original.
Note
❒ If the scan data is larger than the memory capacity, an error message appears
and scanning is canceled. If this happens, specify a lower resolution and scan
the original again.
To Next Page
Loading...
Need help?
General
