Registering Fax Destinations
15
2
M Press the {U}{T} keys to select
[Am] or [Pm], and then press the
{OK} key.
N Enter the current hour using the
number keys, and then press the
{OK} key.
O Enter the current minute using
the number keys, and then press
the {OK} key.
P Confirm the current setting, and
then press the {OK} key.
Q Press the {} key to return to the
previous level of menu tree.
R Press the {Clear/Stop} key to return
to the initial screen.
Registering Fax Destinations
This section describes how to register fax destinations in the Address Book using
the control panel or Web Image Monitor. The Address Book allows you to spec-
ify fax destinations quickly and easily.
The Address Book can contain up to 70 entries (20 Quick Dial entries and 50
Speed Dial entries).
❖ Quick Dial entries
Destinations registered as Quick Dial entries can be selected by pressing the
corresponding One Touch button.
❖ Speed Dial entries
Destinations registered as Speed Dial entries can be selected by pressing the
{Address book} key, and then entering the corresponding registration num-
ber.
Registering Fax Destinations Using Web Image Monitor
This section describes how to register destinations using Web Image Monitor.
A Start the Web browser and access the machine by entering its IP address.
B Click [One Touch Button] or [Fax Speed Dial].
C From the [Add New Type] list, select [Fax].
D Select [Quick Dial] or [Speed Dial], and then select the registration number
from the list.
E Register [Name] and [Fax Number] as necessary.
F Enter the administrator password if required.
G Click [Submit].
H Close the Web browser.
To Next Page
Loading...
Need help?
General
