17
Place the original face down on the exposure glass or face up in
the ADF.
Lift the ADF carefully without holding the input tray. Otherwise, the ADF
might be damaged.
Exposure Glass ADF
• If necessary, configure the advanced scan settings. For details, see "Advanced Scan Settings"
on page 19.
Enter the fax number (up to 40 characters) using the number
keys.
Press the [B&W Start] key.
Depending on the machine's settings, you
will be prompted to place another original
on the exposure glass. In this case,
proceed to the next step.
To Next Page
Loading...
