37
Where to Inquire
Contact your sales or service representative for further information about topics covered in
this manual or to enquire about topics not covered in this manual.
Saving Energy
This machine is equipped with the following Energy Saver modes: Energy Saver mode 1
and Energy Saver mode 2.
By default, this machine is set to enter Energy Saver mode 2 if it has been idle for 10
minutes. In Energy Saver mode 2, the machine's power consumption becomes lower than
in normal state. The machine takes about 1 minute to recover from Energy Saver mode 2.
According to your convenience, you can change how long the machine waits before
entering Energy Saver mode 2 by configuring the [Power Saver] setting under [Admin
Settings].
If the machine is in Energy Saver mode 2 for 24 hours continuously, the machine automati-
cally returns to normal state and performs self-maintenance.
For details about [Power Saver], see "Administrator Settings", User Guide.
Copyright © 2008
❖ Opening Manuals
The "Manuals" CD-ROM provided with the machine contains manuals in
HTML format and PDF. Install the manuals before using the machine.
There are two ways to view the manuals.
• Double-click the manual icon on your desktop.
• On the [Start] menu, point to [All Programs], point to [Product Name],
and then click [Manual Name].
• The menu options may appear differently, depending on the options
chosen during installation.
• For details about installing the manuals, see "Guide to the Machine",
User Guide.
Appendix
To Next Page
Loading...
