Installing the Machine
39
2
❒ Make sure to select the correct code for the country of use. Selecting the
wrong country code may cause failures in fax transmissions.
❖ Display language
The language selected here is used for the display.
❖ User fax number
The number entered here is used as the fax number of the machine. The user
fax number can contain 0 to 9, space, and "+".
❖ User name
The name entered here is used as the name of the fax sender.
❖ Country code
The country code selected here is used for configuring the time and date dis-
play formats, and the settings related to fax transmissions with appropriate
default values for the country of use.
A Press the {U}{T} keys to select the required language, and then press the
{OK} key.
B Enter the user fax number (up to 20 characters) using the number keys, and
then press the {OK} key.
To enter two 0's successively, press the {T} key after entering the first 0.
C Enter the user name (up to 20 characters) using the number keys, and then
press the {OK} key.
D Press the {U}{T} keys to select the required country code, and then press
the {OK} key.
Note
❒ You can change the settings configured during the Initial Setup later under
[Admin Settings]. In addition, you can set the machine's time and date under
[Admin Settings].
❒ When the [Transmitter Header] setting under fax transmission settings is
turned on, the registered user fax number, user name, and time and date
of transmission appear on the header of every fax you send.
Reference
For details about entering characters, see p.95 “Entering Characters”.
For details about [Admin Settings], see p.231 “Administrator Settings”.
For details about [Transmitter Header], see p.209 “Fax Transmission Set-
tings”.
To Next Page
Loading...
