Friction Pad
D3GQ 14 SM
2.6 FRICTION PAD
Before Replacing the Friction Pad
Before replacing the friction pad, reset the PM counter.
1. Turn the power ON.
2. Reset the PM counter. (Refer to Chapter 3 "Replacement Procedure of the PM/Yield Parts" of
Field Service Manual)
3. Turn the power OFF.
Replacing the Friction Pad
1.
Remove the paper feed roller. (Paper Feed Roller)
2. Remove the friction pad [A]. (Hooks × 2, × 1)
When reinstalling the friction pad:
• To prevent the friction pad from catching on the sheet [A], place the friction pad while
bending the sheet slightly outward.
To Next Page
Loading...
