Rohde & Schwarz R&S FSL3 - Page 1576

R&S FSL FETCh Subsystem (WiMAX, K92/K93)
1300.2519.12 6.817 E-11
– FETCh:BURSt:RMS:AVERage?
– FETCh:BURSt:RMS:DATA:AVERage?
– FETCh:BURSt:RMS:DATA:MAXimum?
– FETCh:BURSt:RMS:DATA:MINimum?
– FETCh:BURSt:RMS:DLPReamble:AVERage?
– FETCh:BURSt:RMS:DLPReamble:MAXimum?
– FETCh:BURSt:RMS:DLPReamble:MINimum?
– FETCh:BURSt:RMS:MAXimum?
– FETCh:BURSt:RMS:MINimum?
– FETCh:BURSt:RMS:PILot:AVERage?
– FETCh:BURSt:RMS:PILot:MAXimum?
– FETCh:BURSt:RMS:PILot:MINimum?
– FETCh:BURSt:RSSI?
– FETCh:BURSt:RSSi:AVERage?
– FETCh:BURSt:RSSi:MAXimum?
– FETCh:BURSt:RSSi:MINimum?
– FETCh:BURSt:SYMBolerror:AVERage?
– FETCh:BURSt:SYMBolerror:MAXimum?
– FETCh:BURSt:SYMBolerror:MINimum?
– FETCh:BURSt:TDOMain:PREamble?
– FETCh:BURSt:TDOMain:SUBFrame?
– FETCh:BURSt:TDOMain:ZONE?
– FETCh:SYMBol:COUNt?
– FETCh:ZONE:COUNt?
Further information
– "ASCII formats for returned values" on page 6.817
ASCII formats for returned values
The results are output as a list of result strings separated by commas.
OFDM results
<min EVM all bursts>,<average EVM all bursts>,<max EVM all bursts>
<min EVM data carriers>,<average EVM data carriers>,<max EVM data carriers>
<min EVM pilots>,<average EVM pilots>,<max EVM pilots>
<min IQ offset>,<average IQ offset>,<maximum IQ offset>
<min gain imbalance>,<average gain imbalance>,<max gain imbalance>
<min quadrature offset>,<average quadrature offset>,<max quadrature offset>
<min frequency error>,<average frequency error>,<max frequency error>
<min symbol error>,<average symbol error>,<max symbol error>