Cable TV Measurements (Option K20) R&S FSL
1300.2519.12 4.230 E-11
Softkeys of the measurement menu (Cable TV Analyzer mode)
The following table shows all softkeys available in the measurement menu in Cable TV Analyzer mode
(MEAS key). It is possible that your instrument configuration does not provide all softkeys. If a softkey is
only available with a special option, model or (measurement) mode, this information is delivered in the
corresponding softkey description.
Menu /
Command
Submenu /
Command
Submenu / Command Command
Analog TV Spectrum Channel No
Adjust Attenuation
Carriers Channel No
Edit Table
Adjust Attenuation
C/N Channel No
Reference Power Reference Channel
Same as Meas
Channel
Manual Reference
Power
C/N Setup Insert Line
Delete Line
Next Meas Frequency
Edit Table
Meas Carrier
Adjust Attenuation
CSO Channel No
Reference Power same contents as in
C/N submenu
CSO Setup same contents as in
C/N Setup submenu
Next Meas Frequency
Edit Table
Meas Carrier
Adjust Attenuation
CTB Channel No
Reference Power same contents as in
C/N submenu
CTB Setup same contents as in
C/N Setup submenu
Next Meas Frequency
Edit Table
Meas Carrier
Adjust Attenuation
Analog TV Settings
To Next Page
Loading...
