3GPP Base Station Measurements (Option K72) R&S FSL
1300.2519.12 4.284 E-11
Menu / Command Submenu / Command Submenu / Command Command
Code Dom Power Diagram
Code Dom Result Summary Select Channel
Result Summary Normal
Result Summary Extended
Power CP / ACP Config # of TX Chan
# of Adj Chan
Channel Settings Channel Bandwidth
Channel Spacing
Chan Pwr/Hz
ACP Ref Settings
Adjust Ref Lvl
Adjust Settings
Limit Checking Limit Chk On/Off
Edit ACP Limit
Power Mode Clear/Write
Max Hold
Select Trace
Adjust Settings
Sweep Time
Fast ACP On/Off
ACP Abs/Rel
Adjust Ref Lvl
ACP same contents as Power
menu
Spectrum Emission Mask Limit Line Auto
Limit Line Manual
Limit Line User
Restore Std Lines
30kHz/1MHz Transition
Adjust Ref Level
Auto Level&Code
Starts a sequence performing the following steps:
– Auto adjust the reference level.
– Search and select scrambling code with the highest power.
– Start measurement.
– Select Code Domain Result Summary result display.
Remote: CDP:ASEQ
To Next Page
Loading...
