Simrad EK15 - Page 205

Functionsanddialogboxes
3Identity
Thisinformationreectsthetypeoftransceiverconnected,andthetransceiver’s
uniqueEthernetaddress.
SBTmeansSingleBeamTransceiver.
4Version
Thisinformationincludestheuniqueversionparametersprovidedbythetransceiver.
Codesidentifyingfrequency,serialnumberandrmwareareprovided.
5SWVersion
Thisisthesoftwareversioncurrentlyrunningonthetransceiver.
6IPAddress
Thisisthetransceiver’scurrentIPaddress.
Note
Ifyouusemorethanonetransceiver,thesemustbesetupusingdifferentIP
addresses.
7ConnectedIPAddress
ThisistheIPaddressofthecomputer’sEthernetboardthatisusedtocommunicate
withthetransceiver(s).
8Available
Thisparameteridentiesiftheselectedfrequencychanneliscurrentlyavailablefor
usewiththeEK15.Ifitisavailable,thestatusisidentiedasTrue.
Topics
•TransceiverInstallationdialogbox;Channellistonpage201
•TransceiverInstallation;Transceiverinformationonpage202
•TransceiverInstallation;Transceiverbrowsingonpage203
Relatedprocedures
•Installingafrequencychannelonpage81
•Disconnectingafrequencychannelonpage82
•ModifyingatransceiverIPaddressonpage82
Relatedtopics
•Setupmenu;functionsanddialogsonpage170
•NormalOperationdialogboxonpage154
•Installationmenuonpage189
TransceiverInstallation;Transceiverbrowsing
Purpose
TheBrowserparametersareusedwhenyouwishtostartanautomaticsearchfor
transceiversonthenetwork.Thecommunicationismadebetweenyourcomputer
(identiedwithitsLocalIPAddress)andoneormoretransceivers.
351718/C
203