The Analyzer Module
How to Save, View, and Delete Analyzer Measurement Results
How to View Stored Measurement Results and Measurement
Setups
Viewing stored measurement setups and measurement results is easy.
• From the Microlog’s main menu, select the Review icon. The Analyzer – Load
Setup screen displays a list of all stored measurements and measurement setups.
Figure 4 - 10.
An Example Analyzer – Load Setup Screen.
saved measurement results and their setups
You may open previously stored measurement results, and you may open and reuse
previously stored measurement setups.
• Use arrow buttons to select a saved measurement or saved measurement setup
and press the Open function button. The selected measurement / measurement
setup displays.
When viewing saved measurement results:
• Use cursor functions to analyze the measurement, or use the Start, Stop, Average,
View, and Save function buttons as previously described to retake the
measurement using its original settings.
• Use the Setup function button to view the saved measurement’s original settings.
You may then alter the measurements settings and retake the measurement with
new settings.
Press the Print function button to print the displayed spectrum.
Reference Chapter 1 – Introduction to the GX Series Microlog
for more information on printing.
4 - 16 SKF Microlog - GX Series
User Manual
To Next Page
Loading...
