SKF Microlog GX Series - How to Delete Stored Files; To Delete All Files; Folders; The Delete All Screen

The Analyzer Module
How to Save, View, and Delete Analyzer Measurement Results
• Eject the card and store in a safe place, or insert the card into the host computer
and copy the backed up files to the host computer’s hard drive.
How to Delete Stored Files
To delete a single stored file (either measurement results or measurement
settings):
• From the Analyzer – Load Setup screen, use up/down arrow buttons to select a
file for deletion.
• Press the Delete function button. You are prompted to confirm the deletion.
• Answer Yes, the file is deleted and you remain in the Analyzer – Load Setup
screen.
To delete all files / folders:
• From the Analyzer – Load Setup screen, use up/down arrow buttons to select the
– all –option. The Delete All screen displays.
Figure 4 - 11.
The Delete All Screen.
Files – Deletes all saved files (both measurement results and measurement settings
files). You are prompted to confirm the deletion.
Folders – Deletes all folders and their contents. You are prompted to confirm the
deletion.
All – Deletes all saved folders and files. You are prompted to confirm the deletion.
Cancel – Cancels the deletion process and returns you to the Analyzer – Load Setup
screen.
• Select one of the above deletion options to perform the deletion.
4 - 18 SKF Microlog - GX Series
User Manual