SKF Microlog GX Series User Manual

Introduction to the SKF GX Series Microlog
The GX Series Microlog Main Menu Screen
The GX Series Microlog Main Menu Screen
The GX Series Microlog has a high resolution, supertwist, color graphic liquid crystal
display (LCD) ). Everything needed to identify and assess a measurement appears on
the color LCD screen (identification, description, engineering units, warning alarms, and
current value).
When you first turn on the GX Series Microlog, the SKF title screen initially displays,
showing your unit’s installed modules and firmware version number. After a few
seconds the GX Series Microlog automatically displays its main menu screen showing all
of the modules; modules that were not purchased are inactive (dimmed module icons)
and will require a license key entry to activate before use.
 Reference the Module Management section for more details on
ho
w to delete unwanted or unused icons from the Main screen.
Figure 1 - 3.
The GX Series Microlog Main Menu Screen.
SD card installed
battery level indicator showing AC power is connected
Available operating modes (both preinstalled and purchased) are identified with icons on
the main screen’s display area.
Refer to Appendix D of this manual for important restrictions when using the
CMXA 75-SL-Z2 Microlog in a Zone 2 restricted area.
SKF Microlog - GX Series 1 - 9
User Manual

SKF Microlog GX Series Specifications

General

Brand	SKF
Model	Microlog GX Series
Category	Measuring Instruments
Language	English